Sim2 Crystal - Manual (Page 11)

11 Positioning your projector
Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation locations.
Your room layout or personal preference will dictate which installation location you
select. Take into consideration the size and position of your screen, the location of a
suitable power outlet, as well as the location and distance between the projector and
the rest of your equipment.
*To set the projector position:
1. Press MENU on the projector or remote control and then press / until the
System menu is highlighted.
2. Press / to highlight Projector Position and press / until the correct
position is selected.
1. Floor Front:
Select this location with the projector
placed near the floor in front of the screen.
This is the most common way to position
the projector for quick setup and
portability.
3. Floor Rear:
Select this location with the projector
placed near the floor behind the screen.
Note that a special rear projection screen
is required.
*Set Floor Rear after you turn the projector
on.
2. Ceiling Front:
Select this location with the projector
suspended from the ceiling in front of the
screen.
Purchase the original Projector Ceiling
Mount Kit from your dealer to mount your
projector on the ceiling.
*Set Ceiling Front after you turn the
projector on.
4. Ceiling Rear:
Select this location with the projector
suspended from the ceiling behind the
screen.
Note that a special rear projection screen
and the proper Projector Ceiling Mount Kit
are required for this installation location.
*Set Ceiling Rear after you turn the
projector on.
Language
Splash Screen
Projector Position
Auto Off
Sleep Timer
Background Color
Menu Settings
Input Source
System
S-Video
English
Brand
Auto Source Search
EXIT Back
Disable
Disable
Blue
Off
Floor Front
Display Setup