Sim2 Crystal - Manual (Page 34)

34 Using the projector
Turning the projector off
To turn the projector off, press POWER OFF on the remote control to turn the projector off
directly.
• The Power indicator light flashes orange and the fans run for about two minutes to
cool the lamp. The projector will not respond to any commands until the cooling
process is complete.
• Then, the Power indicator light is a steady orange once the cooling process has
finished and fans stop.
• If the projector will not be used for an extended period, unplug the power cable from
the power outlet.
• To protect the lamp, the projector will not respond to any commands during the
cooling process.
Actual lamp life may vary due to different environmental conditions and usage.