Sim2 Crystal - Manual (Page 45)

45 Using the projector
Specifications
All specifications are subject to change without notice.
Optical
Projection system
Single-chip DLP
TM
system.
DMD chip 0.65" DLP (1920 x 1080)
Lens F = 2.48 to 2.83, f = 24.1 to 36.14 mm
Projection screen size 28" to 300"
Lamp 280W
Electrical
Compatibility PC: 640 x 400 to 1920 x 1200
Video: NTSC, PAL, SECAM, YPbPr (480i/480p/576i/576p),
HDTV (720p/1080i/1080p)
DDC 2B
Color Space Typ. = 70% NTSC (Target Color Gamut = HDTV Rec. 709)
Terminals
Input Analog RGB: D-Sub 15-pin (female) x 1
HDMI (V. 1.3) x 2
Component Video (Y/C
B
/C
R
, Y/P
B
/P
R
) x 1
Component Video (Y/C
B
/C
R
, Y/P
B
/P
R
) x 1 (shared with
RGB input)
Composite Video x 1
S-Video x 1
Output
Control 12VDC (Max. 0.5 A)
Serial Connector: RS232 9 pin (male)
Mini B type USB x 1
IR receiver x 2
General characteristics
Projector weight 11.5 kg
Power VAC 100-240V, 3.9A, 50-60Hz (Automatic)
Power consumption Max. 430W; Standby < 1 W
Operating temperature 0 °C to 35 °C at sea level
Operating humidity 10% - 90% (without condensation)
Operating altitude 0-1499 m at 0°C-35°C
1500-3000 m at 23°C-30°C (with High Altitude Mode on)
Storage temperature -20°C- 60°C/-4°F to 140°F
Storage humidity 10% - 90%
Dimensions
450 mm x 364 mm x 167 mm (W x D x H)