Sim2 Crystal - Manual (Page 35)

35 Using the projector
On-Screen Display (OSD) menus
On-Screen Display (OSD) structure
Please note that the on-screen display (OSD) menus vary according to the signal type selected.
Main menu Sub-menu Options
Image
Picture Mode Cinema Mode/Dynamic Mode/Standard/User 1/User 2/User 3
Load Settings From
Brightness 0–100
Contrast 0–100
Color 0–100
Tint -20–+20
Sharpness 0–8
Reset Picture Settings
Rename User Mode
Color
Black Level 0 IRE/7.5 IRE
Clarity Control
Noise Reduction 0/1/2/3
Detail Enhancement 0-5
Luma Transmission 0/1/2
Chroma Transmission 0/1/2
Color Temperature
Normal/Cool/Lamp Native/Warm/User 1/User
2/User 3
Color Temperature
Fine Tuning
Red Gain 0–100
Green Gain 0–100
Blue Gain 0–100
Red Offset 0–100
Green Offset 0–100
Blue Offset 0–100
Gamma Selection 1.6/1.8/2.0/2.2/2.4/2.5/2.6/2.8
Brilliant Color On/Off
Color Management
Primary Color Red/Yellow/Green/Cyan/Blue/Magenta
Range 0–100
Saturation 0–100
Film Mode On/Off
3D Comb Filter On/Off
Dynamic Black On/Off
Display
Aspect Ratio Anamorphic/4:3/Letter Box/Wide/Real
Keystone 2D Keystone
Position
Overscan Adjustment 0/1/2/3
PIP
PIP On/Off
Main Source
HDMI 1/HDMI 2/Video/S-Video/Component 1/
Component 2/PC
Second Source
Active Window Main/PIP
Position
Top-Right/Bottom-Left/Bottom-Right/Top-
Left
Size Large/Small
PC & Component
YPbPr Tuning
H.Size -15–+15
Phase -15–+15
Auto