Lamp information, Getting to know the lamp hour, Extending lamp life – Sim2 Crystal User Manual

Page 42: Replacement lamp, For det, Getting to know the lamp, Setting lamp power as economic, Setting auto off

Advertising
background image

42

Using the projector

Lamp information

Getting to know the lamp hour

When the projector is in operation, the duration (in hours) of

lamp usage is automatically calculated by the built-in timer.

The method of calculating the equivalent lamp hour is as

follows:

Equivalent lamp hour

= 1 (hours used in Economic mode) + 3/2 (hours used in

Normal mode)

See

"Setting Lamp Power as Economic"

below for more information on

Economic mode.

To obtain the lamp hour information:

1. Press MENU and then press / until the Setup menu is

highlighted.

2. Press to highlight Lamp Settings and press ENTER. The

Lamp Settings page displays.

3. The lamp hour information is shown in the row of

Equivalent Lamp Hour.

4. To leave the menu, press MENU.

Extending lamp life

The projection lamp is a consumable item. To keep the lamp life as long as possible, you

can do the following settings via the OSD menu.

• Setting Lamp Power as Economic

Using Economic mode reduces system noise and power consumption. If the Economic

mode is selected, the light output will be reduced and result in darker projected

pictures.

Setting the projector in Economic mode also extends the lamp life. To set Economic
mode, go to the Setup > Lamp Settings > Lamp Power menu and press / .

• Setting Auto Off

This function allows the projector to turn off automatically if

no input source is detected after a set period of time.

To set Auto Off, go to the System > Auto Off menu and press

/ to select a time period. The time period can be set from

5 to 30 minutes in 5-minute increments. If the preset time

lengths are not suitable for your presentation, select Disable.

The projector will not automatically shut down in a certain time period.

Replacement lamp

The projector does not require internal adjustment. There are no user serviceable parts

inside the projector. To replace the bulb or any other repairs, contact your local service

centre, whose engineers will be happy to efficiently solve any problem.

Lamp Settings

Test Pattern

High Altitude Mode

Password

Reset All Settings

Setup

EXIT Back

S-Video

ENTER

Off

Lamp Settings

Lamp Power

Equivalent Lamp Hour

EXIT Back

Reset Lamp Timer

Economic

HDMI Settings

Baud Rate

115200

50 hours

System

Information

Language
Splash Screen
Projector Position

Auto Off

Sleep Timer
Background Color
Menu Settings
Input Source

System

S-Video

English

Brand

Auto Source Search

EXIT Back

Disable

Disable

Blue

On

Floor Front

Display

Setup

Advertising