Teletronics WINC900A User Manual
Page 5
5
Table Of Contents
Page #
1.0 OVERVIEW
6
2.0 TECHNICAL INFORMATION
6
3.0 EQUIPMENT CHECK LIST
6
4.0 INSTALLATION AND COMMUNICATING WITH THE WINC 900A
8
4.1 HARDWARE CONNECTION
8
4.2 COMMUNICATION SOFTWARE SETTINGS
9
4.3 COMMUNICATING WITH THE WINC 900A
11
5.0 AVAILABLE OPERATION MODES IN WINC 900A & APPLICABLE
APPLICATIONS
13
5.1 SUMMARY OF VARIOUS OPERATION MODES, APPLICABLE
APPLICATIONS, AND FAQ
14
5.1.1.1 POINT-TO-POINT DIAL-UP CONNECTION OPERATION
MODE
14
5.1.1.2 APPLICABLE APPLICATIONS
5.1.2.1 POINT-TO-POINT AUTO CONNECTION OPERATION MODE 15
5.1.2.2 APPLICABLE APPLICATIONS
5.1.3.1 MULTIPLE-TO-ONE DYNAMIC DATA REPORTING &
MONITORING MODE
16
5.1.3.2 APPLICABLE APPLICATIONS
5.1.4.1 MULTIPLE-TO-MULTIPLE TRANSPARENT OPERATION
MODE
19
5.1.4.2 APPLICABLE APPLICATIONS
5.2 FAQ AND SYSTEM ADJUSTMENT
20
6.0 WINC 900A INTERFACE STATUS
22
7.0 AT COMMAND SET
24
7.1 AT COMMAND SYNTAX
24
7.2 BASIC AT COMMANDS
25
7.3 EXTENDED AT COMMAND SET
30
7.4 S REGISTERS
33
7.5 COMMONLY USED AT COMMANDS WITH THE WINC 900A
33
APPENDIX A - AT COMMANDS FOR THE WINC 900A
36
APPENDIX B - S REGISTER SUMMARY
39
APPENDIX C - WINC 900A SPECIFICATION
44
ADDITIONAL SUPPORT