Ac power, Standard version: 5v-12v, Camera control – Thinklogical Camera Fiber-Link Manual User Manual
Page 18
Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual
14
Rev. E, June 2012
3.1.5. Camera Control
Communications from the Camera to the Frame Grabber, SerTFG
—Differential pair with serial
communications to the frame grabber, are sampled at 97 MHz.
Communications from the Frame Grabber to the Camera, SerTC
—Differential pair with serial
communications to the camera, are Sampled at 97 MHz.
Camera Controls 1-4 (CC1, CC2, CC3 and CC4) are sampled at 97 MHz.
3.2. AC Power
3.2.1. Standard Version: 5V-12V
Separate wall-pack AC-to-DC converters (Part Number PWR-000022-R) are included. A power
jack is provided on both units and accepts the +5VDC input. The green power LED will light
when the unit is receiving power.
The AC wall pack has a universal power rating (100-240 VAC, 50-60 Hz) and comes with slip-
on, interchangeable adapters for various AC power receptacles found throughout the world.
Use the appropriate AC power wall plug adapter for your country/location.
Figure 7: A 5V
–12V Power Supply is provided with each Camera Fiber-Link unit.
Each comes with three international AC power wall plug adapters.