Cfl-6000, Increased security, Class 1 lasers – Thinklogical Camera Fiber-Link Manual User Manual
Page 8
Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual
4
Rev. E, June 2012
CFL-6000
CFL-000S06-SCRX
Camera Fiberlink 6000, High Speed Dual Base Frame Grabber, Single Mode, SC/APC
VOP-S15
Camera Fiberlink 4000 Optics Option for TX or RX, Single Mode, 4 Fibers, 40km
CFL-000M06-LCRX
Camera Fiberlink 6000, High Speed Dual Base Frame Grabber Side, Multi-Mode, LC
CFL-000M06-SCRX
Camera Fiberlink 5000, High Speed Dual Base Frame Grabber Side, Multi-Mode, SC
CFL-000M06-STRX
Camera Fiberlink 5000, High Speed Dual Base Frame Grabber Side, Multi-Mode, ST
VOP-S17
Camera Fiberlink 6000 Optics Option for TX or RX, Multi-Mode, 4 Fibers, 50M, 350M or 1000M, LC
VOP-S16
Camera Fiberlink 6000 Optics Option for TX or RX, Multi-Mode, 4 Fibers, 50M, 350M or 1000M, SC or ST
Table 1: Available Models
To complement its line of Camera Fiber-Link extenders, Thinklogical
®
also offers high perform-
ance USB 2.0 and Firewire 800 Camera Extenders. To contact a Thinklogical
®
sales represent-
ative for details,
see the “How to Contact Us” section of this manual (pg. 22).
1.2.2. Increased Security
Thinklogical
’s
®
Camera Fiber-Link Systems are designed for high-resolution camera extension
applications. The ability to position the cameras far from the CPU allows better control and
security for your source equipment, which is especially important in applications where the
cameras must be located in harsh, industrial or non-secured environments.
Remote Mounting
Each Camera Fiber-Link module can be used as a desk top or wall-mounted
device. Mounting centers are provided with keyhole slots.
(For vertical wall-mounting, it is recommended that you orient the unit with
the fiber cables and power connector at the top and MDR-26 and RJ45
connectors at the bottom.)
A mounting template is provided in Appendix D (pg. 34) for your convenience.
1.2.3. Class 1 LASERs
The Camera Fiber-Link system is designed and identified as a Class 1 LASER product.
CLASS 1 LASERS do not require any special
precautions under conditions of normal use.