Thinklogical Camera Fiber-Link Manual - Manual (Page 5)

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 1 Rev. E, June 2012
1. Introduction
1.1. The Logical Solution
Process and machine monitoring, safety, security and surveillance applications often require that
remote cameras be positioned far from their controlling computers. Long distance image
transmission, security and resolution are top priorities in these and many other environments.
Th
at’s why we’ve developed the Thinklogical
®
Camera Fiber-Link Extension System with the
Camera-Link ® standard for high performance digital cameras and frame grabbers.
1.2. The Camera Fiber-Link System
The Camera Fiber-Link System uses a Camera Side Unit and a Frame Grabber Side Unit that are
connected by duplex, multi-mode fiber optic cables, allowing Camera Link video support up to 350
meters (1150 feet) from the host computer with no loss of signal or resolution and without the use
of amplifiers or repeaters of any kind. With industrial enhancements such as a threaded screw-
lock input for standard 5V-12V input power, or for our 12V-24V input power, designed for rugged
industrial environments, the Camera Fiber-Link System is ideal for any application.
CAMERA
®
Conventions Used In This Manual
As you read this manual you will notice certain conventions that bring your attention to important
information. These are Notes and Warnings. Examples are shown below.
Note: Important Notes appear in blue text preceded by a yellow exclamation
point symbol, like this.
A note is meant to call the reader’s attention to helpful information at a point in the text that is
relevant to the subject being discussed.
Warning! Warnings appear in red text, followed by blue text, and preceded by a
red stop sign, like this.
A warning is meant to call the reader’s attention to critical information at a point in the text that is
relevant to the subject being discussed.
BEFORE STARTING ANY PROCEDURE, IT IS RECOMMENDED
THAT YOU READ THE INSTRUCTIONS THOROUGHLY!