Thinklogical Camera Fiber-Link Manual - Manual (Page 25)

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 21 Rev. E, June 2012
5.2.3. European Union
5.2.3.1. Declaration of Conformity
Manufacturer’s Name & Address: Thinklogical , LLC
®
100 Washington Street
Milford, Connecticut 06460 USA
Telephone (203) 647-8700
Product Name:
Camera Fiber-Link Video Extension System
These products comply with the requirements of the Low Voltage Directive 72/23/EEC and the
EMC Directive 89/336/EEC.
5.2.3.2. Standards with Which Our Products Comply
Safety
 IEC60950:1992+A1, A2, A3, A4, A11
LASER Safety
 IEC60825:2001 Parts 1 and 2
 Class 1 LASER Product
Electromagnetic Emissions
 EN55022: 1994 (IEC/CSPIR22: 1993)
 EN61000-3-2/A14: 2000
 EN61000-3-3: 1994
Electromagnetic Immunity
 EN55024: 1998 Information Technology Equipment-Immunity Characteristics
 EN61000-4-2: 1995 Electro-Static Discharge Test
 EN61000-4-3: 1996 Radiated Immunity Field Test
 EN61000-4-4: 1995 Electrical Fast Transient Test
 EN61000-4-5: 1995 Power Supply Surge Test
 EN61000-4-6: 1996 Conducted Immunity Test
 EN61000-4-8: 1993 Magnetic Field Test
 EN61000-4-11: 1994 Voltage Dips & Interrupts Test
5.3. Supplementary Information
The following statements may be appropriate for certain geographical regions and might not
apply to your location.
Note: This equipment has been tested and found to comply with the limits for a
Class 1 digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is