Vinpower Digital SharkCopier Series - Manual (Page 11)

- 8 -
If you would like to use one of the Writers as the source, use the up or down button to locate
Drive 1 or up and press ENT/Enter button to select it.
If the drive you’ve selected is same as the original source, the system will NOT
respond to the ENT/Enter button. Please press ESC/Escape button to go back to
the main menu.
Once the source has been selected, you will be guided to the main menu. You should see
the following screen:
Section 2: Making Copies from the Reader
(when the Reader is selected as the source drive).
Step 1: Use the Up or Down button to navigate to the Copy menu:
Step 2: Press the ENT/Enter button to enter the Copy menu. You should then see the
Counter feature screen.
The Counter feature will let you choose how many copies you want to make for your project.
It allows the system to count the number of copies you’ve made for this job and prompt you
when the desired number has been achieved.
The Counter feature is for your convenience only, and will allow you to make more
copies than the amount desired, if so required.
You can choose not to input your desired number of copies if you prefer to copy
continuously with no interruption. (It will still count the number of copies you’ve made for this
job, but it will not notify you when to stop.) To do so, simply press ENT/Enter button when
you see the “No Counter” on the 2
nd line of the screen below:
Drive 1 Port x.x
Pioneer DVD-RW DVR-1
DUPLICATOR 3.37
1.Copy
Counter:
No Counter
Counter:
No Counter
DUPLICATOR 3.37
8.Select Source