Vinpower Digital SharkCopier Series - Manual (Page 43)

- 40 -
Error
Code
Error Message Description & Recommended Solutions
206
Targets &
Master Size
Mismatch!
Description:
When the error code occurs during the Compare process, the size of
the master disc and the successfully copied disc(s) is different.
When the error code occurs during a Copy related process, the
capacity of the blank disc(s) is less than the data size of the master
disc.
Possible Solution:
When the error code occurs during the Compare process, contact
Tech Support.
When the error code occurs during a Copy related process, please
go to “Disc Info” in “Utilities” to make sure the blank disc’s capacity is
large enough to fit the data size of the master disc.
207
Targets M Code
Mixed!
Description:
The blank discs contain different manufacture codes.
Possible Solution:
Please go to “Disc Info” in “Utilities” to make sure every blank disc
has the same media ID (M-Code). Replace the one(s) that are
different if necessary.
208
Targets are not
RW discs!
Description:
The target(blank) discs are not Rewritable discs
Possible Solution:
Please go to “Disc Info” in “Utilities” to make sure every blank disc is
a rewriteable disc.
209
Master Disc is
CSS Protected!
Description:
The master disc is copy-protected.
Possible Solution:
This master disc contains copy-protection. Please try a different
master disc without any copy-protection.
210 Bad Discs!
Description:
The target (blank) disc(s) are detected but can not be identified.
Possible Solution:
Please double check the blank disc(s) quality.
211
This format can
not be tested!
Description:
The target (blank) disc(s) is DVD+R, DVD+RW, DVD+R DL, BD-R or
BD-RE.
Possible Solution:
Above disc formats are not supported by the Test function. Please
use DVD-R/RW or CD-R/RW discs if this function.