Vinpower Digital SharkCopier Series - Manual (Page 35)

- 32 -
12.7 Startup Menu
This setting will allow you to choose which menu you would like to see first when you
turn on the system.
12.8 Screen Saver
This setting will allow you to choose whether you want to enable the Screen Saver
feature or not. By enabling this feature, a screen saver will be displayed when your
system has been idle for a long period of time.
12.9 Duplication Mode
There are two duplication modes: Load and Copy and On the Fly. Load and Copy
allows faster duplication from the Hard Drive by simultaneously copying onto the blank
media in the writer drives while loading the master disc to the hard drive. All
subsequent copies will be created from the stored master on the HDD. The On the Fly
mode instructs the system to copy directly from the master disc. When using On the
Fly mode, no information is stored on the hard drive.
12.10 Counter
This option will allow you to enable/disable the Counter feature by turning this feature
ON or OFF. This feature will notify you how many discs have been copied and how
many discs are left to go.
12.11 DVD+R High Compatibility Mode
This feature will allow you to enable/disable the DVD+R High Compatibility Mode
feature by turning this feature ON or OFF. The purpose of this feature is to increase the
compatibility of DVD+R media with a broader range of DVD Video players. This
process will increase the amount of time required to duplicate your disc(s).
12.12 ISRC
This option will allow you to enable/disable copying the ISRC code of the Audio CD.
ISRC is the serial# of the audio tracks that uniquely identifies the song in that audio
track. This ISRC code is commonly found in commercial Audio CD’s and rarely seen
on home made Audio CDs. By enabling this feature, the duplication performance will
be lowered.
12.13 Disable Drives
This feature allows you to disable certain drives/trays when those drives/trays are
producing high failure rates or not functioning properly.
12.14 External Connection (Optional)
This feature will allow you to turn on/off the USB/eSATA/Network port on the back of
your system. This option will allow one or more drives on the system to be controlled
by a PC. This feature will only be visible if supported External Connections were
installed.
*Please note that system needs to be restarted when this setting is changed.
12.15 Overburn
Overburning is the process of recording data past the normal size limit. Many disc
manufacturers extend a recordable disc to leave a small margin of extra groove at the
outer edge. This feature allows you to turn the ability to use the overburn area ON or
OFF.