AEC WD 350 through WD3000 Dehumidifying Dryers - Manual (Page 35)

350-2100 cfm Dryers Chapter 5: Startup, Shutdown & Operation 34 of 58
7. Press once. The hour and minute display returns to zeroes and the hour indicator should be
blinking.
Setting the stop time:
1. Press or until the desired dryer shut down hour is displayed. The shut down time is set
in a 24-hour format.
2. Press to store the shut down hour in the timer's memory. The hour indicator should stop
blinking.
3. Press or until the desired dryer shut down minute is displayed. The minute indicator
should be blinking.
4. Press to store the shut down minute in the timer's memory. The minute indicator will stop
blinking.
5. Now the #1 output Status indicator should be blinking. Press once to set the output to the
OFF status.
6. Press once. The hour and minute display will return to zeroes and the hour indicator
should be blinking.
Set the days of the week for automatic operation:
1. Press
MODE
. The Day of the Week indicator will appear and the Sunday indicator should be
flashing.
2. Press to automatically operate the dryer on Sunday, press to prevent the dryer from
automatically operating on Sunday. Reverse video - white characters on a black background
indicates the day(s) selected for automatic operation. For example:
SUN
3. Press to store Sunday in the timer's memory. Proceed until all desired days of the week are
set.
Put the timer into Run mode:
1. Press
MODE
until the current time appears. The colon between the hours and minute
should be blinking. The timer is now in run mode and automatic operation will begin as
programmed.