Airmar PB200 - Manual (Page 41)

PB200 WeatherStation User Manual revision 1.000
Proprietary and Confidential
35
PGN
126720-49
(0x1EF00)
Proprietary: Set WAAS Satellite
Single Frame: No Priority: 7/Y/N Update Rate: 0/N/N Destination: Address Query Support: Yes Access Level: 0
Field
#
Name
Request
Param.
DD DF Type Resolution Value Remark
1 Manufacturer Code Yes DD172 DF52 11 bits 1 135 (decimal) Manufacturer Code for Airmar Technology.
2 Reserved bits No DD001 DF52 2 bits 1 0x3 All bits set to logic "1"
3 Industry Group Yes DD168 DF52 3 bits 1 4 (decimal) Industry Group for "Marine Industry".
4 Proprietary ID (PID) Yes DD005 DF53 uint8 1 bit 49 (decimal) 49 = Set WAAS Satellite
5 WAAS Satellite Number No DD074 DF53 uint8 1 bit 0=Auto Mode (default)
120-138=WAAS satellite
ID
255=Data Not Available /
Do Not Change
This command can be used to direct the
GPS to use a specific WAAS satellite.
This value is NOT stored in Eeprom, but
is changeable with the Command Group
Function PGN 126208.
Notes
This PGN is transmitted in response to a PGN 126208 Request Group Function message. Fields 1, 3, and 4 must each be fully specified in the request in order for this PGN to be
transmitted.
This PGN does not respond to ISO Requests (PGN 59904).
This PGN performs the same function as the received NMEA 0183 sentence $PAMTC,OPTION,4,XXX.