ATL Telecom AM2 - Manual (Page 76)

ATL User Guide
AM2 G.SHDSL Modem 76
The VLAN ID is a unique number ranging from 1~4095.
The VLAN port status is a 12-digit binary number whose bit-1 location indicates the VLAN port membership
in which 4MSBs and 8LSBs represent the LAN port and WAN port, respectively. For example, setting the Port
Status to 10001, means that the VID 20 member port includes LAN and WAN. The member ports are tagged
members. Use the PVID command to change the member port to untagged members
PVID
To assign PVID (Port VID), move the cursor ">>" to PVID command and press the enter key. The port index
1 represents LAN1 and port index 5 to 12 represents WAN1 to WAN8. On selecting the PVID command the
following message is displayed
Command: setup vlan pvid <1~12> <1~4094>
Message: Please input the following information.
Port index <1~12>:
VID Value (Enter for default) <10>:
Link_Mode
To modify the link type of the port, move the cursor to link_mode command and press the enter key. There
are two types of link: access and trunk. A Trunk link will send the tagged packet from the port and an Access
link will send an un-tagged packet from the port. Port index 1 represents LAN1. According to the operation
mode of the device, the link type of the WAN port is automatically configured. If the product operates in
bridge mode, the WAN link type will be Trunk, and in routing mode it will be Access. On selecting the
Link_mode command the following message is displayed
Command: setup vlan link_mode <1~12> <Access|Trunk>
Message: Please input the following information.
Port index <1~12>:
Port link type (Tab select) <Trunk>:
List
To view the VLAN table, move the cursor to the list command and press the enter key.