Epson EISA Desktop - Manual (Page 124)

Option I, Format
If you select Format from the Hard Disk Format Menu, you
see the following (for a disk with no defective track table):
Format
Hard Disk < Drive n: >
Scan hard disk to get defective track
information? (Y/N)
(If the disk already has a defective track table, you do not see
this because you do not need to scan for bad tracks.)
1. Select
Y
to scan the disk or N to skip the scanning process.
If you select
Y
, the program scans the disk and displays these
messages during the process:
Scanning for flagged bad tracks...
Head
: n n n
Cylinder
: nnnnn
You see the head and cylinder numbers decrease as the
program progresses. After scanning the disk, the program
displays the results, such as the following:
Scanning finished.
Count of tracks flagged bad = 1
Count of tracks with other errors = 0
Count of good tracks
= 4 8 8 4
2. Next you see the following prompt:
Accept recommended skewed sectors in
format : 1 ? (Y/N)
Formatting a Hard Disk B - 5