Epson EISA Desktop - Manual (Page 32)

Note
The first time you configure your computer, you must run
the program from the Reference 1 diskette and it is best to
always run it from there.
How to Use This Chapter
This chapter is divided into the following four sections:
The Configuration Process describes the various aspects of
configuring your computer using the System Configuration
program. It also tells you how to use the keyboard or a
mouse with the program and how to use on-line help.
Configuring Your System provides step-by-step
instructions for running the System Configuration program
and is organized in the order in which you should perform
the operations.
Using Alternate Configuration Files tells you how to
create and use alternate configuration files, should you find
it necessary to do so.
Using Special Modes tells you how to configure your
computer by running it in special operating modes, such as
non-target modeling mode.
Read “The Configuration Process” first to familiarize yourself
with all aspects of the configuration process. Then perform the
configuration operations in the order they are described under
“Configuring Your System.”
If you need to create alternate configuration files or run the
program in special modes, see pages 2-19 or 2-21, respectively.
2-2 Running System Configuration