Epson EISA Desktop User Manual
Page 137
If you think the problem may be caused by a loose physical
connection inside the computer, follow these steps:
1. Remove any diskettes and then turn off your peripheral
devices and your computer.
2. Disconnect the computer’s power cord and peripheral
device cables and then remove the computer’s cover, as
described in Chapter 4.
3. Ground yourself by touching the inside back panel of the
computer case before you perform the next step.
4. Check to be sure all of the internal cable connections are
secure and that the processor board and any option
cards are completely seated in their connectors. Then
press down firmly, but gently, on each socketed chip on
the main system board to ensure that they are also
completely seated.
5. Replace the computer’s cover and reconnect the
peripheral device and power cables, as described in
Chapter 4.
6. Turn on your system and try booting it again.
If the computer still does not load your operating system,
contact your dealer.
C-6 Troubleshooting