H3C Technologies H3C S5820X Series Switches - Manual (Page 44)

34
Figure 29 Attach 2U mounting bracket kits in the front mounting position of the S5820X-28C switch
NOTE:
When installing the mounting brackets in the mid-mounting position of the S5820X-28C switch, first use
a screwdriver to loosen the three captive screws, and separate the mounting brackets from the cable
management brackets (see Figure 30 ).
Figure 30 Separate a cable management bracket from a mounting bracket
(1) Captive screws (2) Cable management bracket (3) Mounting bracket
Rack-mounting the S5820X-26S switch
Attaching the slide rails to the rack
You must install slide rails for rack-mounting the S5820X-26S switch.
To attach the slide rails to the rack:
1. Identify the rack attachment position for the slide rails.
2. Install cage nuts (user-supplied) to the rack posts.
3. Align the screw holes in one slide rail with the cage nuts in the rack post on one side, and use
screws (user supplied) to fix the slide rail to the rack, as shown in Figure 31 .
4. Repeat the preceding step to install the other slide rail to the rack post on the other side. Keep the
two slide rails at the same height so the slide rails can slide into the chassis rails.
(2) (1) (3) (1)
Separate the mounting
bracket and cable
management bracket