H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 50)

41
Use the NMS to set a MIB variable on the AP. The following is a sample log message displayed on the
configuration terminal:
%Nov 23 16:16:42:581 2011 AP SNMP/6/SNMP_SET:
-seqNO=37-srcIP=1.1.1.2-op=SET-errorIndex=0-errorStatus=noError-node=sysLocation(1.3.
6.1.2.1.1.6.0)-value=beijing; The agent received a message.
Table 1 SNMP log message field description
Field Description
Nov 23 16:10:09:482 2011 Time when the SNMP log was generated.
seqNO
Serial number automatically assigned to the SNMP log,
starting from 0.
srcIP IP address of the NMS.
op SNMP operation type (GET or SET).
node MIB node name and OID of the node instance.
errorIndex Error index, with 0 meaning no error.
errorStatus Error status, with noError meaning no error.
value
Value set by the SET operation (this field is null for a GET
operation).
If the value is a character string that has characters beyond the
ASCII range 0 to 127 or invisible characters, the string is
displayed in hexadecimal format, for example, value =
<81-43>[hex].
NOTE:
The information center can output system event messages to several destinations, including the terminal
and the log buffer. In this example, SNMP log messages are output to the terminal. To configure other
message destinations, see "Information center configuration."