H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 65)

56
Table 4 Default output rules for different output destinations
Output
destinatio
n
Modules
allowed
LOG TRAP DEBUG
Enabled/
disabled
Severity
Enabled/
disabled
Severity
Enabled/
disabled
Severity
Console
default (all
modules)
Enabled
Informatio
nal
Enabled Debug Enabled Debug
Monitor
terminal default (all
modules)
Enabled
Informatio
nal
Enabled Debug Enabled Debug
Log host
default (all
modules)
Enabled
Informatio
nal
Enabled Debug Disabled Debug
Trap buffer
default (all
modules)
Disabled
Informatio
nal
Enabled
Informatio
nal
Disabled Debug
Log buffer
default (all
modules)
Enabled
Informatio
nal
Disabled Debug Disabled Debug
SNMP
module default (all
modules)
Disabled Debug Enabled
Informatio
nal
Disabled Debug
Web
interface default (all
modules)
Enabled Debug Enabled Debug Disabled Debug
System information format
The following shows the original format of system information, which might be different from what you see.
The actual format depends on the log resolution tool you use.
Formats
The system information format depends on the output destinations, as shown in Table 5 .
Table 5 System information formats
Output destination Format Example
Console, monitor
terminal, logbuffer,
trapbuffer, or SNMP
timestamp sysname
module/level/digest: content %Jun 26 17:08:35:809 2008 Sysname
SHELL/4/LOGIN: VTY login from 1.1.1.1
Log host
• H3C format:
<PRI>timestamp
Sysname %%vvmodule/level
/digest: source content
• UNICOM format:
<PRI>timestamp Sysname
vvmodule/level/serial_numb
er: content
• H3C format:
<189>Oct 9 14:59:04 2009
MyDevice %%10SHELL/5/SHELL_LOGIN(l):
VTY logged in from 192.168.1.21
• UNICOM format:
{
<186>Oct 13 16:48:08 2000 H3C
10IFNET/2/210231a64jx073000020:
log_type=port;content=Vlan-interface1
link status is DOWN.
{
<186>Oct 13 16:48:08 2000 H3C
10IFNET/2/210231a64jx073000020:
log_type=port;content=Line protocol on
the interface Vlan-interface1 is DOWN.