H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 62)

53
Information center configuration
Overview
The information center collects and classifies system information as follows:
• Receives system information including log, trap, and debugging information from source modules.
• Outputs the information to different information channels, according to output rules.
• Outputs information to different destinations, based on channel-to-destination associations.
To sum up, information center assigns the log, trap and debugging information to the 10 information
channels according to the eight severity levels and then outputs the information to different destinations.
The following describes the working process in detail.
Figure 23 Information center diagram (default)
By default, the information center is enabled. It affects system performance to some degree when
processing large amounts of information. If the system resources are insufficient, disable the information
center to save resources.