H3C Technologies H3C Intelligent Management Center - Manual (Page 203)

181
{
percent sign (%)
{
caret (^)
{
asterisk (*)
{
left brace({)
{
right brace (})
{
left parenthesis (()
{
right parenthesis ())
{
left bracket ([)
{
right bracket (])
{
hyphen (-)
{
underscore(_)
{
plus sign (+)
{
equal sign (=)
{
question mark (?)
{
vertical bar (|)
{
colon (:)
{
semi-colon (;)
{
apostrophe (')
{
comma (,)
{
dot (.)
{
spaces
It cannot be null and cannot be the same as any existing SSID.
7. In the Selected Devices area, select the fat APs where you want delete the WLANs. Options are
All Fat APs and Selected Fat APs.
{
All Fat APs—Select this option to delete the WLANs with the specified SSID on all managed
fat APs in IMC. Then go to step 13.
{
Selected Fat APs—Select this option to delete the WLANs with the specified SSID only on the
selected fat APs.
8. If the Selected Fat APs option is selected, the page refreshes to displays the Fat AP List area. In
the Fat AP List area, click Add to display the Select Devices dialog box.
9. Enter or select one or more of the following query criteria to search for the fat APs where a
WLAN is to be deleted:
{
Device Label—Enter the label of the fat AP. WSM supports fuzzy matching for this field.
{
IP Address—Enter the IPv4 address of the fat AP. WSM supports fuzzy matching for this field.
{
Model—Enter the model of the fat AP. WSM supports fuzzy matching for this field.
{
Connectivity Status—Select a connectivity state for the fat AP. Options are Unlimited,
Reachable, and Unreachable.
{
Location—Enter or select the name of the location view to which the fat AP belongs. WSM
supports fuzzy matching for this field.
If you leave a field empty, or set a field to Unlimited, the field does not serve as a query
criterion.