H3C Technologies H3C Intelligent Management Center - Manual (Page 81)

59
Deleting a group
Deleting a fit AP group deletes all of the information related to the group. The fit APs in the group are
automatically assigned to the default group. You cannot delete the Default Group on an AC.
To delete a group:
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
2. Click the Operation icon for the target AC.
3. Select Group Configuration from the menu.
The Group List displays all fit AP groups on the AC.
4. Click the Delete icon for the group you want to delete.
A confirmation dialog box appears.
5. Click OK.
Viewing the fit APs in a group
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
2. Click the Operation icon for the target AC.
3. Select Group Configuration from the menu.
The Group List displays all fit AP groups on the AC.
4. Click the name of the fit AP group you want to view.
The Fit AP List displays all fit APs in the group.
Querying fit APs in a group
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
2. Click the Operation icon for an AC.
3. Select Group Configuration from the menu.
The Group List displays all fit AP groups on the AC.
4. Click the name of the target group.
The Fit AP List displays all fit APs in the group.
5. Enter or select one or more of the following query criteria in the query area:
{
AP Label—Enter the label of the fit AP. WSM supports fuzzy matching for this field
{
AP Name—Enter the name of the fit AP. WSM supports fuzzy matching for this field.
{
Serial Number—Enter the serial number of the fit AP. WSM supports fuzzy matching for this
field. For example, if you enter 5, all fit APs with serial numbers containing 5 are queried.