H3C Technologies H3C Intelligent Management Center - Manual (Page 25)

5-4
supply entity in the device’s slot 1 exists and where the entity is read.
Entity Status indicates the status rule of the entity in the device’s
logical entity (slot).
Figure 5-4 Properties of the logical entity
In this example, MIB Table of S7503E shows where the data of
modules and power supplies is read, and SubEntity Status shows
the status rule of the modules and power supplies on the switch. MIB
Table of power supply 1 shows where power supply 1’s information is
read, and Entity Status shows the status rule of power supply 1.
For an IRF virtual device, the MIB Table of a chassis shows where
the chassis entity belongs. The MIB Table also shows where the
sub-entities belong if they are in the same MIB table. In this case, you
do not need to specify the MIB tables for the sub-entities.