H3C Technologies H3C Intelligent Management Center User Manual
Page 50
Advertising
6-6
Figure 6-8 Rotate ports in a batch
10) Add Combo port 25: first click the Add Port icon (
) to add
the electrical port. Drag it to the right place, change the vendor
type to 6, and select portCommonStatus;portRj45Status as the
entity status. Then, add the optical port in the same way and drag
it to the port slot under port 25. Change the vendor type to 117,
relative position to 25, angle to 180, and entity status to
portCommonStatus;portFiberStatus.
Advertising