Grass Valley 8964FS - Manual (Page 30)

30 8964FS Instruction Manual
Configuration
Module Configuration Pages
Module configuration is provided for the following functions with the GUI
interface:
• SDI In ( page 31 )
• Timing ( page 33 )
• VBI ( page 34 )
• Video Proc ( page 36 )
Read-only information about the module is given on the top of each page
including model name and description, current line rate, frame and slot
location and last E-MEM register recalled.
When a channel is selected to configure, the input name (as defined on the
I/O Config page) will be displayed under the selected channel or will show
the default name.
After making a parameter value change, click on Apply to activate settings
in each selection. Each of the four channels can be adjusted separately or
settings can be applied to other or all channels. Use the
Apply Setting To
( Channel 1, 2, 3 or 4 as applicable) or All buttons to apply the same values to
the other channels selected or all channels.
To reset the current channel or all channels to factory defaults, select the
Reset defaults for
Current Channel or All Channels buttons.
Select the Back , Functional View , or Next link to navigate to the next function or
use the links on the left of the web page.
Click on the Refresh button at the top of the display to update the entire dis-
play.