Grass Valley 8985FS v.1.2.0 - Manual (Page 20)

20 8985FSP/FS/PRC — Instruction Manual
Installation
Video Outputs
There are four electrical coax video outputs at BNCs J5, J6, J7, and J8.
If a 1310-TRL SFP optical submodule is installed, one fiber optic output is
also available. If a 1310-DTL SFP optical submodule is installed, two fiber
optic outputs are also available. Each fiber optic output must be enabled
using local or remote controls. All coax and fiber optic outputs can be active
at the same time.
Genlock Loop
BNCs J1 and J3 are looping inputs to support the optional Genlock sub-
module on the 8985FSP/FS module with an external genlock reference
(NTSC/PAL color black or Tri-level sync). Refer to
Table 3 on page 59 for a
table of compatible frame rates for installing the external genlock reference.
Connect an external reference to J1 or J2 and loop the other input to another
device or terminate the unused input.
Auto Tracking Delay Outputs
BNCs J1 and J3 output an auto tracking delay signal that can be fed to audio
modules to synchronize the audio to the Genlock reference from the 8985
module.