Grass Valley 8985FS v.1.2.0 - Manual (Page 9)

8985FSP/FS/PRC — Instruction Manual 9
8985FSP/FS/PRC
SD/HD Frame Sync/Proc Amp
Modules
Introduction
This manual covers installation, configuration, and operation for the
8985FSP SD/HD Frame Sync Proc Amp, 8985FS SD/HD Frame Sync, and
8985PRC SD/HD Proc Amp modules.
Module Features
The three versions of the 8985 module provide various degrees of frame
synchronization and video processing for environments utilizing SD and
HD signals in both broadcast and ProAV applications. These environments
require video signals to be synchronized with other video sources and pro-
cessed for video quality.
The following features are available with this module series.
• Two module set including a hot-swappable front and rear module.
• Up to ten audio or video modules in the same 2 RU GeckoFlex frame,
including all 8900 Gecko Series modules.
• An optional Genlock submodule (8900GEN-SM) mounted on the
8985FSP/FS circuit board accepts an external reference (NTSC/PAL
color black or Tri-Level Sync) and manages Local reference or two sep-
arate frame buses can be enabled when the submodule is installed on
the modules in slots 1 and 3 of the frame.
• A fiber optic submodule option provides optical input/output inter-
faces for all models. One of three different types of single-mode fiber
optic submodules can be used:
• 1310NM-DTL – provides two optical outputs (TX 1 and TX 2)
• 1310NM-DRL – provides two optical inputs (RX 1 and RX 2).
• 1310NM-TRL – provides one optical input (RX 2) and one optical
output (TX 1).