Grass Valley 8985FS v.1.2.0 User Manual
Page 43
8985FSP/FS/PRC — Instruction Manual
43
Configuration
If the red bar appears, check the System Config page for the presence and
lock status of both the Primary and Secondary references. If there is a
timing difference, use the Genlock web page timing controls to bring the
two references into the green bar range. Refer to the
Split Screen
Use a horizontal or vertical split screen to compare the unprocessed input
video (top or right) to the processed output video (bottom or left). This
control is duplicated and tied together with the Split Screen controls on the
Color Correction and Video Proc web pages. Changes made on any one of
the Split Screen controls will control all three screens.
•
Split Enable
– enable the split screen by checking the Split
Enabled
checkbox.
•
Orientation
– select the orientation of the split screen with the
Vertical
or
Horizontal
radio button.
•
Position
– use this control to set the amount of horizontal or vertical split
(10 to 90%) of unprocessed video to appear on the screen.