Grass Valley Aurora Edit LD v.6.3 Installation - Manual (Page 73)

September 20, 2007 Aurora Edit Installation and Configuration Guide 73
Installation Overview
Installation Overview
Follow the steps in the table below for the type of SmartBin you want to create.
Type of SmartBin What to do... How to do it...
Transfer SmartBin On the
SmartBins
Server Install and configure the
server
• For K2, install
GVG_MMlib software
• For Open SAN, install
Profile Client software
See the documentation that came with your media
server and the NewsShare Technical Reference
Guide.
Install SmartBins Service See “Installing the SmartBins Service” on
page 74 .
Run the SmartBins Setup
Tool See “Running the SmartBins Setup Tool” on
page 75 .
Verify DCOM
Configuration See “Verifying the DCOM Configuration on Your
System” on page 77 .
Obtain a software license See “Licensing Your SmartBins Software” on
page 78 .
On an Aurora
Edit Workstation Create Transfer
SmartBin(s) See “Creating a SmartBin in Aurora Edit” on
page 79 .
Shared SmartBin On the
SmartBins
Server Install and configure the
server
• For K2, install CVFS
• For Open SAN, install
SNFS, Generic iSCSI,
and GVG_Mlib software
See the documentation that came with your media
server and the NewsShare Technical Reference
Guide.
Install SmartBins Service See “Installing the SmartBins Service” on
page 74 .
Run the SmartBins Setup
Tool See “Running the SmartBins Setup Tool” on
page 75 .
On an Aurora
Edit Workstation Create Shared SmartBin(s) See “Creating a SmartBin in Aurora Edit” on
page 79 .
Media Import
SmartBin On the
SmartBins
Server Install and configure the
server See the documentation that came with your media
server and the NewsShare Technical Reference
Guide.
Install SmartBins Service See “Installing the SmartBins Service” on
page 74 .
Run the SmartBins Setup
Tool See “Running the SmartBins Setup Tool” on
page 75 .
Obtain a software license See “Licensing Your SmartBins Software” on
page 78 .
On an Aurora
Edit Workstation Create Media Import
SmartBin(s) See “Creating a SmartBin in Aurora Edit” on
page 79 .