Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 195)

Configure Network Configuration page - NH server
This page displays the control network Ethernet port, and allows you to configure the FTP/Streaming
network Ethernet port.
1. Verify that the top port is configured correctly.
The top port is the port over which the K2Config application is communicating. If correctly
configured, it is already assigned the control network IP address, as displayed on this page.
2. Since the server has the role of FTP server, verify that the other port is configured correctly. If
not configured correctly, do the following:
a) Select the other port and click Modify .
A network configuration dialog box opens.
b) Enter the FTP/Streaming IP address and the subnet mask and click Apply .
3. Click Next .
The File System Server Configuration page opens.
18 November 2010 K2 SAN Installation and Service Manual 195
Configuring and licensing the K2 SAN