Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 221)

7. Verify media file system parameters.
Do not edit the configuration file for the media file system.
8. Click Accept .
A “…Please wait…” message box displays progress and a “…succeeded…” message confirms
the process is complete.
A message informs you that you must restart the K2 Media Server, however the restart at the
end of the Configure K2 Server wizard suffices, so you do not need to restart now.
9. Close the Storage Utility.
NOTE: Do not attempt to start K2 clients or otherwise bring the K2 SAN online until instructed
to do so by the documented procedure.
Next, continue with configuring the server using the K2Config application.
Configuring NH server A - Part 2
Configure File System Server Configuration page - NH server
Prerequisites for connected K2 RAID storage:
• Network and SNMP settings configured
• Disks bound
• New file system made
This page checks on the configuration of the K2 Media Server in one of its main roles as a file
system server. The K2 Media Server also functions as a file system client, which is also checked
from this page.
1. In K2Config open the server's File System Server Configuration page, if the page is not already
open.
18 November 2010 K2 SAN Installation and Service Manual 221
Configuring and licensing the K2 SAN