Grass Valley Trinix NXT v.3.3.1 - Manual (Page 252)

252 Trinix NXT — Installation and Service Manual
Section 4 — Trinix Asymmetrical Power Supply Configurations
The 512X1024 Trinix Asymmetrical Frame
The 512X1024 Asymmetrical frame is designed to support a maximum load
of 5400 Watts. The frame provides four isolated power inputs and two TRX-
SC boards. This connectivity supports up to four external power supply
frames and sixteen power supply modules (
Figure 163 ).
Grass Valley recommends that the power supplies are installed to the side
of the 512X1024 Asymmetrical frame.There must be a 2RU space above and
below the fans for the routing switcher. If your needs require installing the
power supply above and /or below the frame, make sure there is a 2RU
space between the frame and the Power supply.
Note Do NOT place anything on top or on the bottom of the 512x1024 routing
switcher; doing so will block the airflow and may cause the routing switcher
to overheat.