HEIDENHAIN ND 2100G - Manual (Page 261)

ND 2100G GAGE-CHEK 261
2.4 F
o
rm
ulas
In the following two examples, camshaft lift profiles will be measured
at 1 degree intervals over 360 degrees of rotation using a reference
channel rotary encoder and three cam encoders.
In these examples, the number 5 key is pressed to generate an event
that initiates scanning.
The method of playing back scanned data is unique to each of the two
examples. However, in both cases, the OnEvent function is used to
route the data.
C1
C2
C3
C4