HEIDENHAIN SHB Data Interfaces for HEIDENHAIN User Manual
Page 59
6 – 60
HEIDENHAIN Service Manual for Data Interfaces
6.6.3 Description of the machine parameters of TNC 415 B/425
Machine parameters
The following list contains the machine parameters for all software variants.
Since however, several machine parameters are only valid for a certain software or have been
introduced or eliminated as of a certain software version, there are columns with symbols for
differentiation.
Meaning of the symbols:
= The machine parameter applies for all software versions of this control.
04
= The machine parameter has been introduced with a certain software version
(e.g. with version 04).
I04
= The machine parameter is inactive.
-
= The parameter does not exist on this control.
Explanation of the columns:
A
= TNC 415/B/F/BR/FR and TNC 425/E with NC software 259 93* -- or 259 94* --
B
= TNC 415/B/F/BR/FR and TNC 425/E with NC software 280 54* -- or 280 56* --
(special software)
C
= for future use