HEIDENHAIN SHB Data Interfaces for HEIDENHAIN - Manual (Page 68)

April 2010 7 – 69
HOST:
1)
As of NC software 280 472 and 280 473!
Here the name is entered under which the control registers itself at the
SERVER.
The boxes represent for example TNC controls or personal computers. Please note that a TNC
can never be a ROUTER, since it does not feature the second connection for feeding signals
through.
1)
This information can be provided by your network specialist!
On the next pages, please find and example of the settings listed above.
ADDRESS:
1)
Information on the address of your TNC in the network (Internet).