Epson G3 Series - Manual (Page 40)

Setup & Operation 3. Environments and Installation
30 G3 Rev.1
3.5.2 Multiple Mounting
■ Install the Multiple Mounting Manipulator with two or more people.
The Manipulator weights are as follows. Be careful not to get hands, fingers, or
feet caught and/or have equipment damaged by a fall of the Manipulator.
G3-301*M : approx. 29 kg: 64 lb.
G3-351*M : approx. 29.5 kg: 65 lb.
WARNING
■ When installing the Manipulator to the wall, support the Manipulator, and then
secure the anchor bolts. Removing the support without securing the anchor
bolts properly is extremely hazardous and may result in fall of the Manipulator.
Standard-model
(1) Unpack the manipulator with retaining the
arm posture.
(2) Secure the base to the wall with four bolts.
Use bolts with specifications conforming
to ISO898-1 Property Class: 10.9 or 12.9.
4-M8 40 ×
Screw Hole
(depth 20 mm or more)
Spring Washer
Plane Washer
)
NOTE