Epson G3 Series - Manual (Page 88)

Maintenance 3. Covers
3.4 Connector Plate
■ Do not remove the connector plate forcibly. Removing the connector plate
forcibly may result in damage to the cables, disconnection, and/or contact failure.
Damaged cables, disconnection, or contact failure is extremely hazardous and
may result in electric shock and/or improper function of the robot system.
CAUTION
■ When installing the connector plate, be careful not to allow the cables to interfere
with the plate mounting and do not bend these cables forcibly to push them into
the cover.
Unnecessary strain on cables may result in damage to the cables, disconnection,
and/or contact failure. Damaged cables, disconnection, or contact failure is
extremely hazardous and may result in electric shock and/or improper function of
the robot system.
When routing the cables, observe the cable locations after removing the
connector plate. Be sure to place the cables back to their original locations.
Unscrew the connector plate mounting bolts and remove the plate.
G3-**1* Table Top Mounting G3-**1*W Multiple Mounting
Truss:
4-M4 ×8
Connector plate
Truss:
4-M4
×8
Connector plate
78 G3 Rev.1