Epson G3 Series - Manual (Page 42)

Setup & Operation 3. Environments and Installation
32 G3 Rev.1
When the Manipulator is a Cleanroom-model, be aware of the followings.
For the Manipulator of Cleanroom-model, use it with an exhaust system.
For details, refer to Setup & Operation: 2.4 Specifications.
CAUTION
■ When operating the Manipulator under special environmental conditions (adverse
conditions with dust and oily smoke), do not place the controller in the same
condition since the controller does not comply with IP54 / IP65. Doing so may
cause equipment damage to and/or malfunction of the controller.
Cable Connections
Connect the power connector and signal connector of the M/C cables to the Controller.
Power Connector
Signal Connector