2power connections, Power supply connector, Wago part – Yaskawa MP2000iec User Manual
Page 10
10
YASKAWA America, Inc. MP2300iec Hardware Manual YAI-SIA-IEC-2R
2 Power Connections
2
Power Connections
Power Supply Connector
Specifications, Pin Arrangement, and Connection Procedure
Supply 24VDC to the MP23
͙͙͙
iec. Connect the power supply connector as shown in the diagram below.
Name
Connector Name
# of Pins
Connector Model
Module
Cable
Manufacturer
Power Supply
Connector
POWER
3
721-863
721-203/026
WAGO
Symbol
Signal Name
Description
24VDC
24V
24VDC input
0VDC
0V
0V input
FG
Frame ground
(Ground to 100 W or less.)
Use an insulated 24VDC power supply. Attach the power supply switch on the AC side. If the switch is
attached on the 24VDC side, there will be an inrush current of approximately 40A when the power is
turned ON.
DC
DC
24V
0V
POWER
AC input
24 VDC
0 V
24 VDC
0 V
24-VDC
power
MP2300Siec
POWER
FG
FG
721-863
721-203/026
Wago Part #