Yaskawa MP2000iec - Manual (Page 11)

2 Power Connections
YASKAWA America, Inc. MP2300iec Hardware Manual YAI-SIA-IEC-2R 11
„
Connection Procedure
The power supply terminal has a removable connector. Use the following procedure to wire the terminal to the power
supply connector. Use 0.2 mm 2 to 0.51 mm 2 (AWG24 to AWG20) twisted-pair cable.
1. Strip approx. 6.5 mm from the end of the wire.
2. Open the wire insert opening on the terminal with the tool shown in Fig. A or Fig. B.
3. Insert the wire into the opening and then close the opening by releasing the lever or removing the screwdriver.
Fig. A (with lever) Fig. B (with screwdriver)
6.5 mm