Yaskawa MP2000iec - Manual (Page 18)

18 YASKAWA America, Inc. MP2300iec Hardware Manual YAI-SIA-IEC-2R
5 Mounting
5 Mounting
There are two methods for mounting the controller.
• DIN rail (standard method for MP2300Siec)
• Screw mount (standard method for MP2310iec)
‹
DIN Rail Method
„
DIN Rails and Spacer
Several types of DIN rails are available: with 7mm to 15mm gap from the mounting base as shown in the following
diagram. If mounting a MP23 ͙͙͙ iec using DIN rail with 10 mm gap, install a spacer on the rear of the MP23

iec
near the bottom to protect the MP23 ͙͙͙ iec from vibration and shock.
DIN rail clips may be ordered for mounting the MP2310iec (see page
17
).
Mounting base
DIN rail
Gap from mounting base: 7.0 mm to 15.0 mm
For a 10-mm gap
DIN rail
Spacer