Yaskawa MP2000iec - Manual (Page 25)

5 Mounting
YASKAWA America, Inc. MP2300iec Hardware Manual YAI-SIA-IEC-2R 25
„
Installing Option Modules
1. Insert Option Modules
Hold the top and bottom of the Module to be installed, line up the Module on the left-side guide rail inside the Option
Slot, and then insert it straight.
• The FG bar on the inside bottom of the Unit Case may be damaged if the Module is not inserted straight
2. Mount on to the mounting base
Once the Option Module has been completely inserted, place your hand on the front face of the Option Module and
push hard until the Option Module has been inserted into the mounting base connectors. The front face of the Option
Module and the hook will be aligned when the Option Module has been installed properly.
3. Install the panel of the Option Module
Place the hole on the bottom of the panel of the Option Module onto the hook on the bottom of the MP23 ͙͙͙ iec.
Next, hook the hole at the top of the panel of the Option Module onto the hook at the top of the MP23 ͙͙͙ iec.
This completes the Option Module mounting procedure.
If the option slot is not used, attach the optional cover (model: JEPMC-OP2300).
Guider rail