Hongdian H8951 3G/4G Wi-Fi router - Manual (Page 92)

5 Router config H8951 3G/4G Router
(2014-07-01) - 76 -
Figure 5-55 OSPF route configuration interface
Step 4 Configure RIP route parameter instruction, as Table 5-29.
Table 5-30 OSPF route parameter instruction
Parameter Details Option
Add Type Add the type of OSPF route Click the button to select Add Type
 Network

Neighbor
 Interface
 When Add Type is “Network”,
Network Set the network address as
ospf sending address Manual input
Format1: A.B.C.D/Mask
AS Number Used to identify the network
(only the routers with the
same domain address can
exchange routing
information) Manual input
Value area:[0,65535]
When Add Type is “Neighbor”,
Neighbor The router can reach in the
next hop Manual input
Format1: A.B.C.D/Mask
When Add Type is “Interface”,
Interface Name The interface of the router
Dropdown List
 br0

modem
 eth1
 eth0
Interface
Attribute Configure the router
interface attribute, include
cost and network
Click the button to select
 cost
 network