Bang & Olufsen BeoVision 8-40 User Guide - Manual (Page 31)

In
st
al
la
tio
n
an
d
se
tt
in
g
up
Audio system
Connect a Bang & Olufsen audio system with a
Master Link socket to your TV. Connect it to the
Master Link socket on the main connection panel.
Mains cord and plug The supplied plug and mains cord are specially designed for the product. Do not change the plug and if the mains cord is
damaged, you must buy a new one from your Bang & Olufsen retailer. Connect the ~ socket on the main connection panel
of your TV to the wall outlet. The IR-receiver lights up in red and the TV is in standby mode and ready to be used.
IR-transmitters: To operate non-Bang & Olufsen
products with a Bang & Olufsen remote control,
attach a Bang & Olufsen IR-transmitter to each of
the products. Connect each transmitter to the
corresponding socket marked PUC on the main
connection panel.
IR type
In the AV menus you can select how a PUC
controlled product is connected. You can choose
between ‘PLUG’ (cable) and ‘IR’ (IR Blaster).
Only accessible if you have selected an IR socket.
ML
STB
STB
PLUG
IR
31