Bang & Olufsen BeoVision 8-40 User Guide - Manual (Page 6)

TV LIGHT RADIO
DTV DVD CD
V.MEM TEXT A.MEM
7 8 9
4 5 6
LIST 0 MENU
1 2 3
STOP PLAY
BACK
How to use your remote control
Important
– for more information: www.bang-olufsen.com
Select colour specific functions
Adjust volume
To mute, press the middle of the button
The Beo4 display shows you the activated source or function
Navigation and centre button; move left, right, up and down , , and – move in
menus by pressing the button in the direction you need
Centre button; press in the middle to select and accept settings
Rewind or wind, search backwards or forwards
Start playback of a DVD, CD or recording
Switch on a connected set-top box
Standby
Bring up the main menu of the active source
Pause and stop playback or recording
Switch on the TV* 1
Select channels and enter information in on-screen menus
Step through channels
Hold for continuous step
Move backwards through menus and the Beo4 list. Long press to exit menus
completely
Beo4 operation
Your television can be operated with the Beo4 remote control.
Display extra “buttons” for functions or sources in the Beo4 display. Use or to
step in the list
1 *Some buttons can be configured during the
setup process. See p. 29.
NOTE! For general information about remote
control operation, see the guide enclosed with
your remote control.
In the ‘OPTIONS’ menu, you can bring up the ‘BEO4 SETTING’ menu.
Remember to set your Beo4 with navigation button to the MODE
corresponding to the setting you make in the ‘BEO4 SETTING’ menu.
See the Beo4 guide or contact your Bang & Olufsen retailer for
further information.
BEO4 SETTING menu
TV
PLAY
TV
DTV
0 – 9
STOP
MENU
BACK
LIST
6