Logitek Electronic Systems JetStream Audio Networking Platform - Manual (Page 26)

5 Configuration
First Generation JetStream Configuration (s/n 1-199)
Configuration of the Control Surface port is accomplished in conjunction with configuration of the
JetStream MINI. Configuration of the JetStream takes place using the Logitek Configuration
Software, AEConfig. Systems with the JetNet Audio Networking module have AE Config preinstalled.
Systems without JetNet will use a customer supplied laptop and connect via USB to serial adaptor.
First Generation customers who upgrade to the Second Generation
DSP/Network card should follow the Second Generation instructions.

AEConfig was written for the Logitek Audio Engine. See Appendix A to learn
how to use AE Config with the JetStream.
Figure 1 - AEConfig - Hardware Configuration Page
Logitek JetStream MINI Reference Manual 26