Logitek Electronic Systems JetStream Audio Networking Platform - Manual (Page 37)

The columns in the grid represent the outputs; the pink rows represent inputs, green rows represent
DSP outputs. Right click to create an I (Initial Route) mark in the column to connect the desired
DSP or input signal to the output.
The blue section below the green DSP outputs is used for filtering on the Route X-Y and is not part
of the output selection process. Refer to the Utility Panels manual to learn more about the Route X-
Y.
When you have successfully routed an input or DSP source to an output, you will see it listed under
Source Devices on the Output Settings page.
Logitek JetStream MINI Reference Manual 37